top of page
FP644 light grey polyurethane Shaker door with square corners and vertical V-grooves on the flat panel.

Edge Profile

Square Edge
2mm Pencil Round Edge
Chanfer Edge
Colonial Edge
Step Edge

Cross-Section

Cross section of FP644 Shaker door profile showing an 11° bevel to the flat panel, recessed 5mm, with a V-groove.

Specifications

Profile: FP644. Stiles and rails are 60mm wide as standard, but the rail width can be customised to suit. Internal square corners, an11° bevel leading down to the flat panel, which is recessed 5mm from the face of the frame. Vertical V-grooves run top to bottom across the flat panel, spaced about 60mm apart on average. The grooves are always evenly spaced, and the spacing is adjusted to suit the width of the door.

Material: E0-rated moisture-resistant MDF (medium density fibreboard).

Available Thicknesses: 18mm, 21mm, 25mm, and 32mm.

Minimum size: 240mm wide. This leaves a 125mm flat panel with one centred 4mm V-groove, about 60mm of flat panel each side

Edge Profiles: Square edge, 2mm Pencil Round Edge, Chamfer Edge, Colonial Edge, Step Edge.

Finish Options: Matte, Satin, Semi-Gloss, & Raw MDF ready for painting.

Custom Sizes: Yes, cut to order.

Australian Made: Yes. Bankstown, Sydney, since 1986

bottom of page
naver-site-verification: naverf7a8af05dfbcc2cd9311092bf8925de2.html